 |
Key Benefits
Great for cars, trucks, suvs, vans, buses, motorhomes, rv campers and construction equipment. Daily use or long term storage. |
 |
Basic 12 Volt Unit: Monitors the battery and disconnects the electrical system if it detects the battery losing sufficient charge to start the engine. A manual reset button on the Battery Brain Type I unit under the hood only needs to be activated to reconnect the circuit and start the vehicle. Requires manual reset. Bronze Basic
12 Volt Unit Type I Part# 65554 $47.90 each.
Order
|
 |
Gold 12 Volt Unit: Monitors the battery and disconnects the electrical system if it detects the battery is losing sufficient power to start the engine. Offers manual or wired control reconnection with switch for remote mounting. It can also be used to disconnect when leaving the vehicle as an anti-theft feature. Type IV comes with a wired manual switch, which can be mounted remotely, that activates the unit and reconnects the circuit to enable the vehicle to start. The driver can also choose to disconnect the battery using the switch (included in Gold Unit kit), providing an anti-theft / security device when leaving the vehicle as it cannot be started or hot-wired while Battery Brain is in the disconnected mode. Type IV Gold Unit is ideal for commercial or fleet use. Quantity discounts available. Gold 12 Volt Unit Type IV Part# 65557 $69.90 each.
Order
|
STEP 1: Disconnecting Battery Cables: STEP 1A) Disconnect the black / negative (-) cable from the negative (-) battery post / bolt on the battery. STEP 1B: Disconnect the red / positive (+) cable from the positive (+) battery post / bolt on the battery.
STEP 2: Connecting Battery Brain: With the Battery Brain in the OFF position, connect the positive (+) clamp on the positive (+) side of the Battery Brain to the positive (+) battery post / nut.
STEP 3: Connecting Battery Cables and Ground: STEP 3A) Connect red / positive (+) battery cable to the copper post (or Side Mount bolt) on the outer bracket on the Battery Brain. STEP 3B) Connect the black / negative (-) battery cable to the negative (-) post / bolt on the battery. STEP 3C) Connect the clip end of the black ground wire to the clamp bolt on the negative (-) battery post / nut or ground to chassis with a metal screw.
TO COMPLETE INSTALLATION: The manual reset control knob on the Battery Brain unit should be turned to one of the ON positions. Then press down on the manual reset control knob to establish contact.
Once installed on the vehicle's positive battery terminal, all Battery Brain models monitor the battery charge to detect if the charge is being drained below the level required to start the engine (e.g. 12.1 Volts). If this occurs, Battery Brain works by disconnecting the battery from the vehicle's electrical system, preventing further drainage and preserving enough charge to start the engine.
|
Auto Accessory Gift Ideas | Maintenance Tips | Fax Order Form | Aftermarket Line Sheet |
|
Order Toll Free: 1-888-425-2885 Sales Dept. / Accessory Tech. Help: Fax: 1-216-441-9127 Phone Support Hours EST: |
Automotive Accessories Connection Inc.
E - mail: sales@accessconnect.com |
Your car, truck, van and suv accessories dealer on the web since 1996
Anything on our web site is quoted in US government
dollars.
Currency converter
Quantity discounts available. Please contact our
sales staff at: 1-216-441-9120
|
Copyright: 1996, 1997, 1998, 1999, 2000 |
